'
+'Compact and Light Weight
' +'The Compact and light weight design of the in-line 4 cylinder design is quiet, clean-burning anf fuel efficent with power to spare.' +'
'
+'Electronic Fuel Injection
' +'Electronic Fuel Injection is controled by the ECM (Engine Control Module). The air/fuel mixture is matched perfectly to the engine load and speed for maximum performance and fuel efficency.' +'
'
+'ECM: Engine Control Module
' +'Yamahas microcomputer control system constantly monitors engine condition, adjusting ignition timing and air-fuel mixture to provide optimum combustion for sure start, maximum performance, excellent fuel efficency, and clean exhaust. It also prevents over-heating and over-reving and controls the safety systems such as low-oil pressure and low-oil level.' +'
'
+'Idle Ladyrinth Exhaust Chamber
' +'When the engine is idling, exhaust gas is expanded through a ladyrinth, greatly reducing noise.' +'
'
+'Fresh Water flushing device
' +'With Yamaha fresh water flushing device, it is possible to hook a hose directly to a hose and give it a complete internal flushing after use, thus preventing corrosion.' +'
'
+'Over-Rev Limiter
' +'Acts Automatically to stop over-revving caused by convitation, and so on, to prevent damage.' +'
'
+'Over Heat Warning
' +'If the Water Inlet is blocked, this system prevents overheating by reducing engine speed and warning the operator by means of a light and/or buzzer.' +'
'
+'Low Oil Pressure Warning
' +'When Oil Pressure falls below fixed pressure in four stroke, engine reduces speed and light and/or buzzer alert the operator.' +'
'
+'Start In Gear Prevention
' +'The engine will not start while it is in Gear, preventing sudden movement and engine damage.' +'
'
+'Special Aluminum Alloy YDC-30
' +'Developed for major exterior parts of the motors after years of research and testing. YDC-30 offers truly anti-corrosion properties.' +'
'
+'Self Sacrificing Anode
' +'Yamaha Uses Strategically placed aluminium and zinc anodes for Maximum corrosion protection.' +'
'
+'5 Stage Multi Coating
' +'The exterior finish consist of 5 thick coats: 2 Epoxy Primer Layers, 2 acrylic-resin layers and finally an extra clear acrylic-urethane coat for perfect protection.' +'| O/M transom height ( mm/inch) | ' +'516/20.3 | ' +'
| Weight (kg) | ' +'188.0 | ' +'
| Displacement (cm3) | ' +'1741 | ' +'
| Bore x Stroke ( mm ) | ' +'79 x 88.8 | ' +'
| Output (kw/hp) | ' +'84.6/115 | ' +'
| Max. Operating range (rpm) | ' +'5000-6000 | ' +'
| Compression ratio | ' +'9.7 | ' +'
| Fuel Induction System | ' +'DOHC | ' +'
| Ignition | ' +'TCI | ' +'
| Gear ratio | ' +'28:13(2.15) | ' +'
| Operation method | ' +'Remote control | ' +'
| Lubrication Wet-sump | ' +'Standard | ' +'
| Starting system | ' +'Electric | ' +'
| Trim and tilt method | ' +'PTT | ' +'
| Engine stop switch lanyard | ' +'On the remote control box | ' +'
| Shallow water drive | ' +'Standard | ' +'
| Alternator | ' +'25A | ' +'
| Rectifier regulator | ' +'Standard | ' +'
| Start-in-gear prevention | ' +'On the remote control box | ' +'
| Overheat warning | ' +'Standard | ' +'
| Over-revolution prevention | ' +'Standard | ' +'