76 Degree Cross Induction
' +'Setting Cylinders in a 76 Degree V shape makes the engine more compact, while the cross air induction enhances intake efficiency for easier starting, faster acceleration, smoother operation and better economy.' +'
Long Life Piston / Piston Ring
' +'The High-Rigidity piston is made of a material that ensures optimum thermal flow. The Piston Ring has minimal friction resistance and good heat conductivity.' +'
ECM: Engine Control Module
' +'Yamahas microcomputer control system constantly monitors engine condition, adjusting ignition timing and air-fuel mixture to provide optimum combustion for sure start, maximum performance, excellent fuel efficency, and clean exhaust. It also prevents over-heating and over-reving and controls the safety systems such as low-oil pressure and low-oil level.' +'
'
+'Extremely Durable Crank Shaft
' +'The Crank Shaft is made from a specially hardened material for longer engine life, and the engine is well balanced for lower vibration.' +'
'
+'Wide Range PTT
' +'Allows Trim all the way to minus 4 degrees. Negative trim increases acceleration and reduces planing time. Power Tilt means effortless trim and tilt Adjustment.' +'
'
+'Start In Gear Prevention
' +'The engine will not start while it is in Gear, preventing sudden movement and engine damage.' +'
'
+'Over-Rev Limiter
' +'Acts Automatically to stop over-revving caused by convitation, and so on, to prevent damage.' +'
'
+'Over Heat Warning
' +'If the Water Inlet is blocked, this system prevents overheating by reducing engine speed and warning the operator by means of a light and/or buzzer.' +'
'
+'Twin Battery System
' +'One Battery starts the engine, the other supplies power to instruments and accessories, so there is always ample starting power.' +'
'
+'Oil Injection System
' +'Eliminates the need to pre-mix gas and oil by injecting the precise amount of oil directly into the intake manifold. This also ensures quick response to the engines oil demands and minimizes oil consumption.' +'
'
+'Special Aluminum Alloy YDC-30
' +'Developed for major exterior parts of the motors after years of research and testing. YDC-30 offers truly anti-corrosion properties.' +'
'
+'Self Sacrificing Anode
' +'Yamaha Uses Strategically placed aluminium and zinc anodes for Maximum corrosion protection.' +'
'
+'5 Stage Multi Coating
' +'The exterior finish consist of 5 thick coats: 2 Epoxy Primer Layers, 2 acrylic-resin layers and finally an extra clear acrylic-urethane coat for perfect protection.' +'| O/M transom height ( mm/inch) | ' +'641/25.2 | ' +'
| Weight (kg) | ' +'240 | ' +'
| Engine type | ' +'76 degree V6 | ' +'
| Displacement (cm3) | ' +'3130 | ' +'
| Bore x Stroke ( mm ) | ' +'90x82 | ' +'
| Output (kw/hp) | ' +'183.9/250.0 | ' +'
| Max. Operating range (rpm) | ' +'4500-5500 | ' +'
| Compression ratio | ' +'5.7 | ' +'
| Ignition | ' +'CDI-microcomputer standard | ' +'
| Gear ratio | ' +'16:29(1.81) | ' +'
| Operation method | ' +'Remote control | ' +'
| Lubrication | ' +'Pre-mix | ' +'
| Starting system | ' +'Electric | ' +'
| Trim and tilt method | ' +'Wide Range PTT | ' +'
| Prime start | ' +'- | ' +'
| Engine stop switch lanyard | ' +'On the remote control box | ' +'
| Shallow water drive | ' +'Standard | ' +'
| Alternator | ' +'35A | ' +'
| Rectifier Regulator | ' +'Standard | ' +'
| Start-in-gear prevention | ' +'On the remote control box | ' +'
| Overheat warning | ' +'Standard | ' +'
| Over-revolution prevention | ' +'Standard | ' +'
| Remote control box | ' +'- | ' +'
| Tachometer | ' +'- | ' +'
| Trim meter | ' +'- | ' +'
| Propeller | ' +'Standard | ' +'
| Fuel tank lit | ' +'- | ' +'
| Tool kit | ' +'- | ' +'
| Emergency start rope | ' +'- | ' +'
| Spare spark plugs | ' +'- | ' +'